Horizontal Form Fill Seal machine for long pasta with integrated weighing system-
This equipment is design to dose, control and check
weight of long pasta.
The dosing process is made in two stages, first approx.
95% of the target amount is is dropped into the scale
hopper by volume.
The remaining amount is filled via vibratory chute,
until target weight is achieved.
In order to optimize weighing process PLC is constantly
analyzing signals from the weigh cells and evaluate
optimal set points, between bulk volumetric filling,
and top-up via vibratory chute
The CPL85 is an intermittent motion packaging
machine for long-cut pasta and special products
in pillow type bags. It can be equipped with a built in
or independent weighing system like DVD85.
Thanks to its simplicity and reliability CPL85 machine
is well-known and highly appreciated all over the world.
- Easy management of all machine parameters
thanks to the multitasking operator interface.
- Minimum percentage of rejected packs.
- Machine able to handle rough and difficult flowing
- High quality of components sharply reduces parts
wear and consequently maintenance time.
- Sturdy steel structure designed to absorb
- All product contact parts are in stainless steel
- Single product feeding point with independent
initial and final weight system with vibrating chutes.
- Mechanical and pneumatic motion for work cycle.
- Centered print photocell.
- Double sealing system with hot jaws and impulse
for thermo-salable and thermo fusible films.
- Operator interface touch-screen type color panel
for memorization, control and self-diagnostic of
all the weigher and packaging machine operation
parameters. Possibility of remote control through
modem or via Internet.
- Machine cycle control by PLC.
- Film servo unwinding powered device to give
film constant tension.
- The film reels are located underneath for easy
replacement with reel end alarm.
- Discharge belt.
- Special profile sealing unit.
- Double reel support.
- Perforation date unit.
- FSA doser for curl edge shapes up to 25 mm wide.
- Ejecting device for the packs with product in the seals.
60 - 65 pack/min
Polypropylene / Polyethylene
|Reel max. diameter:-
|Compressed air pressure:-
Complete turn-keys food processing and packaging solutions are available on request.
Please contact us on firstname.lastname@example.org to discuss your application.